INSTALLATION PROCEDURE 1. INSTALL VACUUM SWITCHING VALVE (for Active Control Engine Mount System) (a) Install the vacuum switching valve (for active control engine mount system) to the front engine mounting insulator with the nut. Torque: 6.0 N·m {61 kgf·cm, 53 in·lbf} (b) Connect the 3 vacuum hoses to the vacuum switching valve (for active control engine mount system). (c) Engage the wire harness clamp and connect the vacuum switching valve (for active control engine mount system) connector. (d) Install the 2 bolts. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} (e) Engage the wire harness clamp and install the engine wire with the bolt. Torque: 8.0 N·m {82 kgf·cm, 71 in·lbf} 2. INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE Click here 3. INSTALL INLET AIR CLEANER ASSEMBLY Click here 4. INSTALL COOL AIR INTAKE DUCT SEAL Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Navigation System(for Gasoline Model): Voice Guidance Circuit between Radio Receiver and Stereo Component Amplifier
DESCRIPTION This circuit is used when the voice switch of the steering pad switch assembly is pushed. Using this circuit, the radio and display receiver assembly sends signals to the stereo component amplifier assembly. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEI ...