Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Under Hood

UNDER HOOD

GENERAL NOTES

  • Maintenance requirements vary depending on country.
  • Check the maintenance schedule in the owner's manual.
  • Following the maintenance schedule is mandatory.
  • Determine the appropriate time to service the vehicle using either miles driven or time (months) elapsed, whichever reaches the specification first.
  • Maintain similar intervals between periodic maintenance unless noted.
  • Failing to check each vehicle part could lead to poor engine performance and increased exhaust emissions.

WINDSHIELD WASHER FLUID

(a) Check that there is sufficient fluid in the tank.

ENGINE COOLANT LEVEL

(a) Check that the coolant level is between the "FULL" and "LOW" lines on the see-through reservoir.

INVERTER COOLANT LEVEL

(a) Check that there is sufficient fluid in the tank.

RADIATOR AND HOSES

(a) Check that the front of the radiator is clean and not blocked by leaves, dirt or insects.

(b) Check the radiator and hoses for:

  • Damage
  • Cracks
  • Kinks
  • Corrosion
  • Rot
  • Clogging
  • Leaks

BRAKE FLUID LEVEL

(a) Check that the brake fluid level is near the upper level line on the see-through reservoir.

ENGINE DRIVE BELT

(a) Check the drive belt for fraying, cracks, wear or oil.

ENGINE OIL LEVEL (for HV Model)

(a) Check that the engine oil level is between the full level and low level marks on the dipstick with the power switch off.

ENGINE OIL LEVEL (for Gasoline Model)

(a) Check that the engine oil level is between the full level and low level marks on the dipstick with the engine turned off.

HYBRID TRANSAXLE FLUID LEVEL

(a) Check the level of the hybrid transaxle fluid.

Click here

EXHAUST SYSTEM

(a) Visually inspect for severe corrosion, cracks, holes or loose supports.

HINT:

If any change in the sound of the exhaust or smell of the exhaust fumes is noticed, inspect and repair the exhaust system.

    Outside Vehicle

    Hybrid Transaxle Fluid

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Intake Manifold: Installation
    INSTALLATION PROCEDURE 1. INSTALL STUD BOLT HINT: If a stud bolt is deformed or the threads are damaged, replace it. (a) Using an E6 "TORX" socket wrench, install the 2 stud bolts to the intake manifold. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} 2. INSTALL NO. 1 INTAKE MANIFOLD TO HEAD GASKET (a) Ins ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.1355