Toyota Avalon Service & Repair Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL ANTENNA CORD SUB-ASSEMBLY

(a) Connect the connector to install the antenna cord sub-assembly.

HINT:

Use the same procedure for the RH side and LH side.

2. INSTALL NO. 2 AMPLIFIER ANTENNA ASSEMBLY

(a) Engage the 2 guides and install the No. 2 amplifier antenna assembly with the bolt.

Torque:

6.0 N·m {61 kgf·cm, 53 in·lbf}

(b) Connect the 2 connectors.

3. INSTALL NO. 1 AMPLIFIER ANTENNA ASSEMBLY

HINT:

Use the same procedure as for the No. 2 amplifier antenna assembly.

4. INSTALL ROOF SIDE INNER GARNISH LH

Click here

5. INSTALL ROOF SIDE INNER GARNISH RH

HINT:

Use the same procedure as for the LH side.

6. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY LH

Click here

7. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

8. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

Click here

9. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure as for the LH side.

10. INSTALL REAR SIDE SEATBACK ASSEMBLY LH

Click here

11. INSTALL REAR SIDE SEATBACK ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

12. INSTALL REAR SEAT CUSHION LOCK HOOK

Click here

13. INSTALL REAR SEAT CUSHION ASSEMBLY

Click here

14. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

Click here

15. INSTALL LUGGAGE COMPARTMENT INNER TRIM PAD (w/ Seat Heater System)

Click here

16. INSTALL SPARE WHEEL COVER ASSEMBLY (w/ Seat Heater System)

Click here

17. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

for A25A-FXS:

Click here

for 2GR-FKS:

Click here

18. INSTALL LUGGAGE TRIM SERVICE HOLE COVER (for HV Model)

Click here

19. PERFORM DIAGNOSTIC SYSTEM CHECK

for Gasoline Model: Click here

for HV Model: Click here

20. INSPECT SRS WARNING LIGHT

for Gasoline Model: Click here

for HV Model: Click here

    Components

    Removal

    See More:

    Toyota Avalon Service & Repair Manual > Vacuum Switching Valve(for Engine Mounting): Inspection
    INSPECTION PROCEDURE 1. INSPECT VACUUM SWITCHING VALVE (for Active Control Engine Mount System) (a) Measure the resistance. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 37 to 44 Ω 1 ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2021 Copyright www.tavalon.net
    0.032