REASSEMBLY PROCEDURE 1. INSTALL STEERING LOCK ACTUATOR ASSEMBLY NOTICE: When replacing the steering lock actuator assembly, perform registration. (a) Secure the steering column assembly in a vise between aluminum plates. NOTICE: Do not overtighten the vise. (b) Temporarily install the steering lock actuator assembly and upper steering column clamp with 2 new steering lock set bolts.
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Tire Pressure Warning System(for Hv Model): Initialization
INITIALIZATION NOTICE: Initialization can be confirmed through the tire pressure warning light. If the power switch is turned off during initialization, the tire pressure warning ECU and receiver memorizes that initialization was being performed. Therefore, it is not necessary to perform the initial ...
