INSTALLATION PROCEDURE 1. INSTALL STEERING HEATER SWITCH (a) Engage the 2 claws to install the steering heater switch. 
2. INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY Click here 3. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Click here 4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Click here 5. INSTALL INSTRUMENT SIDE PANEL LH Click here 6. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH 7. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Click here
8. INSTALL FRONT DOOR SCUFF PLATE LH Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Lost Communication with Drive Motor Control Module "A" Missing Message (U011087)
MONITOR DESCRIPTION The ECM and inverter with converter assembly (MG ECU) send and receive signals via CAN communication. If a communication error occurs between the ECM and inverter with converter assembly, the ECM illuminates the MIL and stores this DTC. DTC No. Detection Item DTC Detection Condit ...
