Toyota Avalon Service & Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT TILT AND TELESCOPIC SWITCH

(a) Remove the tilt and telescopic switch.

Click here

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G30-1 (VC) - G30-3 (MSW)

Tilt up

342 to 378 Ω

Tilt down

1890.5 to 2089.5 Ω

Telescopic contract

750.5 to 829.5 Ω

Telescopic extend

152 to 168 Ω

If the result is not as specified, replace the tilt and telescopic switch.

*a

Component without harness connected

(Tilt and Telescopic Switch)

    Components

    Installation

    See More:

    Toyota Avalon Service & Repair Manual > Sfi System: Manifold Absolute Pressure / Barometric Pressure Sensor Signal Stuck in Range (P01052A)
    DESCRIPTION Refer to DTC P010511. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P01052A Manifold Absolute Pressure / Barometric Pressure Sensor Signal Stuck in Range Intake manifold pressure measured after engine start drops by less than 3 kPa [0.4 psi] compa ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0182