Toyota Avalon Service & Repair Manual: Disassembly

DISASSEMBLY

PROCEDURE

1. REMOVE STEERING RACK BOOT CLIP (for LH Side)

(a) Using pliers, remove the steering rack boot clip.

2. REMOVE STEERING RACK BOOT CLIP (for RH Side)

HINT:

Perform the same procedure as for the LH side.

3. REMOVE NO. 2 STEERING RACK BOOT CLAMP (for LH Side)

(a) Using a screwdriver, remove the No. 2 steering rack boot clamp.

NOTICE:

Be careful not to damage the No. 2 steering rack boot.

4. REMOVE NO. 2 STEERING RACK BOOT CLAMP (for RH Side)

HINT:

Perform the same procedure as for the LH side.

5. REMOVE NO. 2 STEERING RACK BOOT

(a) Remove the No. 2 steering rack boot.

NOTICE:

  • Check that there is no water, foreign matter or rust inside of the removed No. 2 steering rack boot.
  • If there is no water, foreign matter or rust inside of the No. 2 steering rack boot, pull out the rack bar and check for water, foreign matter or rust.
  • If water or foreign matter in either part, replace them with a new rack and pinion power steering gear assembly.
  • In order to avoid water or foreign matter from adhering to the parts, do not touch the parts unless working in a dust-free, indoors environment.

6. REMOVE NO. 1 STEERING RACK BOOT

HINT:

Perform the same procedure as for the No. 2 steering rack boot.

    Components

    Inspection

    See More:

    Toyota Avalon Service & Repair Manual > Electric Parking Brake System(for Hv Model): Open or Short Circuit in Motor (C13A6)
    DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note C13A6 Open or Short Circuit in Motor Both of following conditions are met: Power switch on (IG) or electric parking brake switch (electric parking brake switch assembly) pulled to lock side with power switch off. Pow ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0223