INSTALLATION PROCEDURE 1. INSTALL FRONT NO. 1 STABILIZER BAR BUSHING (for LH Side) (a) Install the front No. 1 stabilizer bar bushing to the front stabilizer bar as shown in the illustration.
NOTICE:
2. INSTALL FRONT NO. 1 STABILIZER BAR BUSHING (for RH Side) HINT: Perform the same procedure as for the LH side. 3. INSTALL FRONT STABILIZER BAR (a) Install the front stabilizer bar with the 2 front stabilizer bar bushings to the front frame assembly. NOTICE: Make sure that the identification mark is positioned as shown in the illustration.
4. INSTALL FRONT NO. 1 STABILIZER BRACKET LH (a) Install the front No. 1 stabilizer bracket LH to the front frame assembly with the 2 bolts. Torque: 44 N·m {449 kgf·cm, 32 ft·lbf} NOTICE:
5. INSTALL FRONT NO. 1 STABILIZER BRACKET RH HINT: Perform the same procedure as for the LH side. 6. INSTALL FRONT STABILIZER LINK ASSEMBLY LH (a) Install the front stabilizer link assembly LH to the front stabilizer bar with the nut. Torque: 74 N·m {755 kgf·cm, 55 ft·lbf} NOTICE: Do not damage the boot of the ball joint. HINT: If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt. 7. INSTALL FRONT STABILIZER LINK ASSEMBLY RH HINT: Perform the same procedure as for the LH side. 8. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE for HV Model: Click here for Gasoline Model: Click here |
Toyota Avalon Service & Repair Manual > Luggage Compartment Door Lock: Removal
REMOVAL PROCEDURE 1. REMOVE LUGGAGE COMPARTMENT DOOR COVER Click here 2. REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (a) Disconnect the connector. (b) Disengage the clamp. (c) Disconnect the luggage door lock control cable sub-assembly from the luggage compartment door lock cylinder assembly. (d) ...