Toyota Avalon Owners Manual: Front seats

Toyota Avalon Owners Manual / Operation of each component / Adjusting the seats / Front seats

Adjustment procedure

  1. Seat position adjustment switch
  2. Seatback angle adjustment switch
  3. Seat cushion (front) angle adjustment switch
  4. Vertical height adjustment switch
  5. Lumbar support firmness adjustment switch (if equipped)
  6. Lumbar support height adjustment switch (if equipped)

Adjusting the seats

■Power easy access system (vehicles with driving position memory) The driver's seat and steering wheel move in accordance with engine switch mode and the driver's seat belt condition.

WARNING

■When adjusting the seat position

  • Take care when adjusting the seat position to ensure that other passengers are not injured by the moving seat.
  • Do not put your hands under the seat or near the moving parts to avoid injury.

    Fingers or hands may become jammed in the seat mechanism.

  • Make sure to leave enough space around the feet so they do not get stuck.

■Seat adjustment

  • Be careful that the seat does not hit passengers or luggage.
  • To reduce the risk of sliding under the lap belt during a collision, do not recline the seat more than necessary.

    If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen, or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident.

    Adjustments should not be made while driving as the seat may unexpectedly move and cause the driver to lose control of the vehicle.

 

NOTICE

■When adjusting a front seat When adjusting a front seat, make sure that the head restraint does not contact the headliner. Otherwise, the head restraint and headliner may be damaged.
    Adjusting the seats

    Rear seats

    See More:

    Toyota Avalon Service & Repair Manual > Dynamic Radar Cruise Control System(for Gasoline Model): Distance Control Switch Circuit
    DESCRIPTION The vehicle-to-vehicle distance control switch is used to set the distance for vehicle-to-vehicle distance control mode. The vehicle-to-vehicle distance control switch is installed in the steering pad switch assembly. The vehicle-to-vehicle distance set value can be changed by operating ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2021 Copyright www.tavalon.net
    0.0272