INSTALLATION PROCEDURE 1. INSTALL REAR BUMPER ASSEMBLY (a) w/ Intuitive Parking Assist System:
(1) Connect the connector. (b) Engage the 6 claws as shown in the illustration. (c) Engage the 6 claws as shown in the illustration.
HINT: Use the same procedure for the RH side and LH side. (d) for Gasoline Model: (1) Install the 8 clips. (e) for HV Model: (1) Install the 9 clips. (f) Install the clip. HINT: Use the same procedure for the RH side and LH side. (g) Install the rear bumper assembly with the 2 screws. 2. INSTALL REAR COMBINATION LIGHT COVER LH Click here 3. INSTALL REAR COMBINATION LIGHT COVER RH HINT: Use the same procedure as for the LH side. 4. PERFORM CALIBRATION (w/ Intelligent Clearance Sonar System) for HV Model: Click here for Gasoline Model: Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Rear Door Lock: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear door lock with motor assembly removal/installation are shown below. Necessary Procedure After Part ...