DESCRIPTION If a door glass does not slide smoothly or a power window regulator motor assembly or door window regulator sub-assembly does not operate smoothly, the catch protection function may be triggered automatically, resulting in the auto down operation being unable to fully open the power window. CAUTION / NOTICE / HINT NOTICE:
HINT: This symptom may occur for any of the power windows. PROCEDURE
(a) Initialize the power window regulator motor assembly (applicable location). Click here
(a) Check that each power window moves when the auto up and down functions of the multiplex network master switch assembly or power window regulator switch assembly or rear power window regulator switch assembly is operated. Click here OK: Auto up and down functions are normal (applicable location).
(a) Remove the power window regulator motor assembly and door window regulator sub-assembly. (b) Install the door glass to the door glass run. (c) Check that the power window regulator motor assembly and door window regulator sub-assembly operate smoothly. (d) Check that the door glass slides smoothly when sliding it down by hand. NOTICE: Make sure to perform initialization again. HINT: Ensure the following:
OK: Door glass slides smoothly.
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Ecm: Installation
INSTALLATION PROCEDURE 1. INSTALL NO. 2 ECM BRACKET (a) Install the No. 2 ECM bracket to the ECM with the 2 screws. Torque: 4.5 N·m {46 kgf·cm, 40 in·lbf} 2. INSTALL NO. 1 ECM BRACKET (a) Install the No. 1 ECM bracket to the ECM with the 2 screws. Torque: 4.5 N·m {46 kgf·cm, 40 in·lbf} 3. INST ...