Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: On-vehicle Inspection

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Vehicle Exterior / Wiper / Washer / Front Wiper Motor / On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY

(a) for RH Side:

(1) Operate the windshield wiper motor assembly.

(2) Stop the windshield wiper motor assembly operation.

(3) Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

Standard Clearance:

Area

Measurement

A

7.5 mm (0.295 in.)

OK:

The front wiper stops at the position shown in the illustration.

*a

Alignment Mark

(b) for LH Side:

(1) Operate the windshield wiper motor assembly.

(2) Stop the windshield wiper motor assembly operation.

(3) Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

Standard Clearance:

Area

Measurement

A

7.5 mm (0.295 in.)

OK:

The front wiper stops at the position shown in the illustration.

*a

Alignment Mark
    Installation

    Removal

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Motor Generator Control System: Generator Phase U-V-W Current Sensor Signal Compare Failure (P0DFA62,P1C691F)
    DTC SUMMARY MALFUNCTION DESCRIPTION These DTCs indicate that the current sensor value is abnormal. The cause of this malfunction may be one of the following: Internal inverter malfunction Current sensor malfunction Inverter with converter assembly internal circuit malfunction DESCRIPTION DTC No. Det ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0127