INSTALLATION PROCEDURE 1. INSTALL LEVEL WARNING SWITCH ASSEMBLY (a) Install the level warning switch assembly as shown in the illustration.
NOTICE: Make sure that the protrusion of the level warning switch assembly is between the 2 markings. (b) Connect the connector. 2. ADD WASHER FLUID Click here 3. INSTALL FRONT BUMPER ASSEMBLY Click here |
Toyota Avalon Service & Repair Manual > 2gr-fks Emission Control: Fuel Tank Cap
InspectionINSPECTION PROCEDURE 1. INSPECT FUEL TANK CAP ASSEMBLY (a) Visually check that the fuel tank cap assembly and gasket are not deformed or damaged. If the result is not as specified, replace the fuel tank cap assembly. *a Gasket (b) Confirm that ID mark V is printed on the fuel tank cap ass ...