DESCRIPTION The cooler compressor assembly receives refrigerant compression demand signals from the air conditioning amplifier assembly. Based on this signal, the cooler compressor assembly changes the amount of compressor output.
WIRING DIAGRAM PROCEDURE
(a) Disconnect the C59 cooler compressor assembly connector. (b) Connect an oscilloscope to terminal C59-2 (SOL+) and body ground and check the waveform.
OK: Waveform is similar to that shown in the illustration.
(a) Disconnect the G35 air conditioning amplifier assembly connector. (b) Measure the resistance according to the value(s) in the table below. Standard Resistance:
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Exterior Panels / Trim: Rear Spoiler
ComponentsCOMPONENTS ILLUSTRATION *1 LUGGAGE COMPARTMENT DOOR COVER *2 REAR SPOILER SUB-ASSEMBLY N*m (kgf*cm, ft.*lbf): Specified torque ● Non-reusable part InstallationINSTALLATION PROCEDURE 1. INSTALL REAR SPOILER SUB-ASSEMBLY HINT: When installing a new rear spoiler sub-assembly, heat the lugg ...