DESCRIPTION When the ECO switch assembly (electric parking brake switch assembly) is operated, the air conditioning amplifier assembly receives a signal and enables or disables ECO mode control of the air conditioning system.
WIRING DIAGRAM PROCEDURE
(a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Air Conditioner / Data List. (e) Read the Data List according to the display on the Techstream. Body Electrical > Air Conditioner > Data List
OK: ECO switch assembly (electric parking brake switch assembly) condition displayed on the Techstream changes with the actual switch operation.
(a) Remove the ECO switch assembly (electric parking brake switch assembly). Click here (b) Inspect the ECO switch assembly (electric parking brake switch assembly). Click here
(a) Disconnect the G36 air conditioning amplifier assembly connector. (b) Measure the resistance according to the value(s) in the table below. Standard Resistance:
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Accelerator Pedal: Removal
REMOVAL PROCEDURE 1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Click here 2. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY NOTICE: Avoid physical shock to the accelerator pedal sensor assembly. Do not disassemble the accelerator pedal sensor assembly. The accelerator pedal sensor assembly do ...