REMOVAL PROCEDURE 1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH Click here 2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH Click here 3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH Click here 4. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY
5. REMOVE NO. 4 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY (a) for Rear Side: (1) Disengage the guide as shown in the illustration to remove the No. 4 interior illumination light sub-assembly.
(b) for Front Side: (1) Disengage the guide as shown in the illustration to remove the No. 4 interior illumination light sub-assembly.
6. REMOVE NO. 2 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
7. REMOVE NO. 3 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
|
Toyota Avalon Service & Repair Manual > Electronically Controlled Brake System(for Gasoline Model): VSC OFF Switch Circuit
DESCRIPTION The skid control ECU (brake actuator assembly) is connected to the combination meter assembly via CAN communication. Pressing the VSC OFF switch turns off TRAC operation, and pressing and holding this switch turns off TRAC and VSC operation. If TRAC and VSC operations are turned off, "Tr ...