DESCRIPTION If the forward recognition camera detects a malfunction in the forward recognition with heater hood sub-assembly circuit, it will output a malfunction signal to the driving support ECU assembly via CAN communication and this DTC will be stored.
PROCEDURE
HINT: If DTC C1AAE is output by the pre-collision system, perform troubleshooting for the front camera system. Click here
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Lighting (ext): Relay
On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. INSPECT H-LP LH RELAY *a Component without harness connected (H-LP LH Relay) (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 3 - 5 Voltage not applie ...