OPERATION CHECK CHECK PRE-COLLISION SYSTEM SETTING (a) Turn the power switch on (IG). (b) Operate the steering pad switch assembly to change the setting of PCS on the multi-information display to "On" and check that the pre-collision system turns on. HINT: When the power switch is turned on (IG), the PCS will turn on. This can be changed through a customize setting using the Techstream. (c) Operate the steering pad switch assembly to change the PCS setting to "Off" and check that the PCS warning light illuminates.
CHECK PRE-COLLISION SYSTEM SENSITIVITY SETTING (a) Turn the power switch on (IG). (b) Operate the steering pad switch assembly to select Change PCS Sensitivity and check that the warning timing adjustment display on the multi-information display changes between "Far", "Mid" and "Near" accordingly. HINT:
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Headlight Ecu: Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL HEADLIGHT GASKET (a) Install a new headlight gasket. 2. INSTALL HEADLIGHT ECU SUB-ASSEMBLY NOTICE: If the headlight ECU sub-assembly has bee ...