Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Operation Check

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Vehicle Interior / Seat / Seat Heater System(for Hv Model) / Operation Check

OPERATION CHECK

CHECK FRONT SEAT HEATER

(a) Turn the power switch on (IG).

(b) Turn the seat heater switch (radio and display receiver assembly) on and check that the indicator illuminates and the surface of the front seat warms up.

(c) Check that the front seat surface temperature changes according to the operation of the seat heater switch (radio and display receiver assembly) as follows: HI → MID → LO.

CHECK REAR SEAT HEATER (w/ Rear Seat Heater)

(a) Turn the power switch on (IG).

(b) Turn the seat heater switch on and check that the indicator illuminates and the surface of the rear seat warms up.

CHECK THERMOSTAT OF SEAT HEATER ASSEMBLY (REAR SEAT CUSHION HEATER LH) (w/ Rear Seat Heater)

(a) Remove the seat heater assembly (rear seat cushion heater LH).

Click here

(b) Remove the seat heater assembly (rear seatback heater LH).

Click here

(c) Connect the B seat heater assembly (rear seatback heater LH) connector and A seat heater assembly (rear seat cushion heater LH) connector.

*a

Component without harness connected

(Seat Heater Assembly (Rear Seat Cushion Heater LH))

*b

Component without harness connected

(Seat Heater Assembly (Rear Seatback Heater LH))

(d) Apply auxiliary battery voltage and check the operation of the rear seat heater as shown in the table below.

NOTICE:

To prevent the rear seat heater from overheating, be sure to disconnect the auxiliary battery from the rear seat heater immediately after this inspection is completed.

OK:

Auxiliary battery Connection

Specified Condition

Auxiliary battery positive (+) → Terminal K57-1

Rear seat heater operates (Temperature 36 to 44°C (96.8 to 111.2°F))

Auxiliary battery negative (-) → Terminal K57-2

CHECK THERMOSTAT OF SEAT HEATER ASSEMBLY (REAR SEAT CUSHION HEATER RH) (w/ Rear Seat Heater)

(a) Remove the seat heater assembly (rear seat cushion heater RH).

Click here

(b) Remove the seat heater assembly (rear seatback heater RH).

Click here

(c) Connect the C seat heater assembly (rear seat cushion heater RH) connector and D seat heater assembly (rear seatback heater RH) connector.

*a

Component without harness connected

(Seat Heater Assembly (Rear Seat Cushion Heater RH))

*b

Component without harness connected

(Seat Heater Assembly (Rear Seatback Heater RH))

(d) Apply auxiliary battery voltage and check the operation of the rear seat heater as shown in the table below.

NOTICE:

To prevent the rear seat heater from overheating, be sure to disconnect the auxiliary battery from the rear seat heater immediately after this inspection is completed.

OK:

Auxiliary battery Connection

Specified Condition

Auxiliary battery positive (+) → Terminal K58-1

Rear seat heater operates (Temperature 36 to 44°C (96.8 to 111.2°F))

Auxiliary battery negative (-) → Terminal K58-2
    How To Proceed With Troubleshooting

    Parts Location

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Manifold Absolute Pressure - Barometric Pressure Correlation (P006900)
    DESCRIPTION The manifold absolute pressure sensor installed to the intake manifold detects the intake manifold pressure using a built-in sensor. An atmospheric pressure sensor is built in the ECM. When the engine is stopped, the value of the manifold absolute pressure sensor and atmospheric pressure ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0138