Toyota Avalon Service & Repair Manual: Health Check

HEALTH CHECK

HEALTH CHECK

Health Check provides an overall view of vehicle status including telematics. Health Check will provide DCM (Telematics Transceiver) software version, PRL version, and applicable DTCs and fault codes related to telematics.

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Click "Health Check".

Fault Code

Reason

62

VIN not recognized by telematics provider.

64

DCM (Telematics Transceiver) not recognized.

65

VIN mismatch with DCM (Telematics Transceiver).

HINT:

  • If Health Check results in a telematics issue, a specific Fault Code will be displayed.
  • If a fault code occurs, follow the procedure.
  • Fault 62*: Press manual (SOS) switch and inform operator of error message.
  • Fault 64: Press manual (SOS) switch and inform operator of error message.
  • Fault 65: Contact the call center and request that they correct the DCM/VIN registration information in their database.

    *: Verify VIN is correct in ECM. Run Vehicle Inquiry on Techstream and verify VIN is correct.

(e) Data is displayed under "Telematics".

*a

Example

-

-

    Green Indicator Remains Off

    How To Proceed With Troubleshooting

    See More:

    Toyota Avalon Service & Repair Manual > Sfi System: Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature) (P012800,P012807)
    DESCRIPTION The ECM uses the engine coolant temperature sensor, installed to the water outlet, to monitor the operation of the thermostat. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P012800 Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperatu ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2020 Copyright www.tavalon.net
    0.0289