INITIALIZATION RESET BUB (BACK-UP BATTERY) CONDITION HINT: If the BUB (Back-Up Battery) has been replaced, it is necessary to perform this procedure. (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Telematics / Utility / Backup Battery Replacement Reset Body Electrical > Telematics > Utility
(e) According to the display on the Techstream, perform Backup Battery Replacement Reset to reset the BUB (Back-Up Battery) replacement flag. |
Toyota Avalon Service & Repair Manual > 2gr-fks Starting: Relay
InspectionINSPECTION PROCEDURE 1. INSPECT ST RELAY (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher Battery ...
