INSTALLATION CAUTION / NOTICE / HINT HINT:
PROCEDURE 1. INSTALL REAR SEAT AIRBAG ASSEMBLY (a) Install the rear seat airbag assembly with 2 new nuts. Torque: 8.0 N·m {82 kgf·cm, 71 in·lbf} NOTICE:
(b) Connect the wire harness to the wire harness clamp. (c) Engage the clamp. 2. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY Click here 3. INSTALL REAR SEAT SHOULDER BELT GUIDE Click here 4. INSTALL REAR SIDE SEATBACK ASSEMBLY Click here 5. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP 6. INSTALL REAR SEAT CUSHION LOCK HOOK Click here 7. INSTALL REAR SEAT CUSHION ASSEMBLY Click here 8. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY Click here 9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL for Gasoline Model: Click here for HV Model: Click here NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Click here 10. INSTALL LUGGAGE TRIM SERVICE HOLE COVER (for HV Model) Click here 11. PERFORM DIAGNOSTIC SYSTEM CHECK for Gasoline Model: Click here for HV Model: Click here 12. INSPECT SRS WARNING LIGHT for Gasoline Model: Click here for HV Model: Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Lighting System(for Gasoline Model Without Cornering Light): Automatic High Beam System does not Operate or Operation Indicator does not Illuminate
DESCRIPTION The main body ECU (multiplex network body ECU) controls the automatic high beam system based on signals received from the forward recognition camera. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Before replacing the main body ECU (multiplex network body ECU), refer to Registration. Cli ...