Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Camera ECU Malfunction (C1610)

DESCRIPTION

This DTC is stored when a malfunction occurs in the parking assist monitor system*1 or panoramic view monitor system*2.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1610

Camera ECU Malfunction

  • Malfunction occurs in the parking assist monitor system*1
  • Malfunction occurs in the panoramic view monitor system*2
  • Parking assist monitor system*1
  • Panoramic view monitor system*2
  • Radio and display receiver assembly
  • *1: w/ Parking Assist Monitor System
  • *2: w/ Panoramic View Monitor System

CAUTION / NOTICE / HINT

NOTICE:

  • Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.

    Click here

  • When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
    • A communication malfunction DTC may be stored.
    • The radio and display receiver assembly may not operate normally.

PROCEDURE

1.

CHECK MODEL

(a) Choose the model to be inspected.

Result

Proceed to

w/ Parking Assist Monitor System

A

w/ Panoramic View Monitor System

B

B

GO TO STEP 4

A

2.

CHECK DTC (PARKING ASSIST MONITOR SYSTEM)

(a) Clear the DTCs.

Chassis > Parking Assist Camera > Clear DTCs

(b) Recheck for DTCs and check that no DTCs are output.

Chassis > Parking Assist Camera > Trouble Codes

OK:

No DTCs are output.

NG

GO TO PARKING ASSIST MONITOR SYSTEM

OK

3.

CHECK DTC (NAVIGATION SYSTEM)

(a) Clear the DTCs.

Body Electrical > Navigation System > Clear DTCs

(b) Recheck for DTCs and check that no DTCs are output.

Body Electrical > Navigation System > Trouble Codes

OK:

No DTCs are output.

OK

END

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

4.

CHECK DTC (PANORAMIC VIEW MONITOR SYSTEM)

(a) Clear the DTCs.

Chassis > Panoramic View Monitor > Clear DTCs

(b) Recheck for DTCs and check that no DTCs are output.

Chassis > Panoramic View Monitor > Trouble Codes

OK:

No DTCs are output.

NG

GO TO PANORAMIC VIEW MONITOR SYSTEM

OK

5.

CHECK DTC (NAVIGATION SYSTEM)

(a) Clear the DTCs.

Body Electrical > Navigation System > Clear DTCs

(b) Recheck for DTCs and check that no DTCs are output.

Body Electrical > Navigation System > Trouble Codes

OK:

No DTCs are output.

OK

END

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

    Black Screen

    Cellular Phone Inspection

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Occupant Classification System(for Hv Model): Front Occupant Classification Sensor LH Collision Detection (B1785)
    DESCRIPTION DTC B1785 is stored when the occupant detection ECU receives a collision detection signal sent by the front occupant classification sensor LH in the case of an accident. DTC B1785 is also stored when the front seat assembly RH is subjected to a strong impact, even if an actual accident d ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0144