DESCRIPTION This DTC is stored when the television camera assembly judges that the back camera initial setting has not been memorized (television camera assembly optical axis adjustment (back camera position setting) is incomplete).
CAUTION / NOTICE / HINT NOTICE:
PROCEDURE
(a) Perform the following procedure depending on the memory conditions to register the vehicle information into the television camera assembly. (1) Television camera assembly optical axis adjustment (back camera position setting). Click here
(a) Clear the DTCs. Chassis > Parking Assist Camera > Clear DTCs(b) Recheck for DTCs and check that no DTCs are output. Chassis > Parking Assist Camera > Trouble CodesHINT:
|
Toyota Avalon Service & Repair Manual > Air Fuel Ratio Sensor: Inspection
INSPECTION PROCEDURE 1. INSPECT AIR FUEL RATIO SENSOR (for Bank 1) (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω 1 (HA1A) - 4 (A1A-) Always 10 kΩ or higher I ...