Toyota Avalon Service & Repair Manual: Back Camera Initialization Incomplete (C1691)

DESCRIPTION

This DTC is stored when the television camera assembly judges that the back camera initial setting has not been memorized (television camera assembly optical axis adjustment (back camera position setting) is incomplete).

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1691

Back Camera Initialization Incomplete

Back camera initial setting has not been memorized (television camera assembly optical axis adjustment (back camera position setting) is incomplete)

  • Television camera assembly optical axis adjustment (back camera position setting)
  • Television camera assembly

CAUTION / NOTICE / HINT

NOTICE:

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed.

Click here

PROCEDURE

1.

PERFORM CALIBRATION

(a) Perform the following procedure depending on the memory conditions to register the vehicle information into the television camera assembly.

(1) Television camera assembly optical axis adjustment (back camera position setting).

Click here

NEXT

2.

CHECK DTC OUTPUT

(a) Clear the DTCs.

Chassis > Parking Assist Camera > Clear DTCs

(b) Recheck for DTCs and check that no DTCs are output.

Chassis > Parking Assist Camera > Trouble Codes

HINT:

  • If DTC C1691 is output, perform the television camera assembly optical axis adjustment (back camera position setting) again.
  • If DTC C1691 is still output after performing the television camera assembly optical axis adjustment 3 times, replace the television camera assembly.

Result

Proceed to

DTC C1691 is output

A

DTC C1691 is not output

B

A

REPLACE TELEVISION CAMERA ASSEMBLY

B

END

    Steering Angle Sensor Failure (C1626)

    Steering Angle Initialization Incomplete (C1694)

    See More:

    Toyota Avalon Service & Repair Manual > Electronically Controlled Brake System(for Hv Model): Slip Indicator Light Remains ON
    DESCRIPTION The skid control ECU (brake booster with master cylinder assembly) is connected to the combination meter assembly via CAN communication. If the skid control ECU (brake booster with master cylinder assembly) stores a DTC, the slip indicator light comes on in the combination meter assembly ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2021 Copyright www.tavalon.net
    0.0332