INSTALLATION PROCEDURE 1. INSTALL NO. 1 SWITCH WIRE HINT: Perform this procedure only when replacement of the No. 1 switch wire is necessary. (a) Engage the 2 guides to install the No. 1 switch wire to the steering wheel assembly. 2. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (a) Connect the No. 1 transmission shift switch assembly connector and No. 2 transmission shift switch assembly connector to install the No. 1 transmission shift switch assembly and No. 2 transmission shift switch assembly to the No. 1 switch wire. (b) Engage the 2 clamps. (c) Engage the 4 claws to install the shift paddle switch (transmission shift switch assembly) to the steering wheel assembly. (d) Install 2 new screws. Torque: 1.7 N·m {17 kgf·cm, 15 in·lbf} 3. INSTALL STEERING PAD SWITCH ASSEMBLY Click here 4. INSTALL STEERING WHEEL ASSEMBLY Click here |
Toyota Avalon (XX50) 2019-2022 Owners Manual > Steps to take in an
emergency: If the vehicle becomes
stuck
Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: 1. Stop the engine. Set the parking brake and shift the shift lever to P. 2. Remove the mud, snow or sand from around the front wheels. 3. Place wood, stones or some other material under the fron ...