Toyota Avalon Service & Repair Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

HINT:

Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

Click here

(a) Install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.

NOTICE:

  • If the mass air flow meter sub-assembly has been struck or dropped, replace it.
  • If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.
  • Make sure that the O-ring is not cracked or moved out of place when installing the mass air flow meter sub-assembly.

(b) Connect the mass air flow meter sub-assembly connector.

2. PERFORM INITIALIZATION

(a) Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

Click here

    Inspection

    On-vehicle Inspection

    See More:

    Toyota Avalon Service & Repair Manual > Transmission Wire: Installation
    INSTALLATION PROCEDURE 1. INSTALL TRANSMISSION WIRE (a) Coat the O-ring of the transmission wire with Toyota Genuine ATF WS. (b) Install the transmission wire to the automatic transaxle case sub-assembly with the bolt. Torque: 5.4 N·m {55 kgf·cm, 48 in·lbf} (c) Connect the transmission revolution ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2023 Copyright www.tavalon.net
    0.0196