PRECAUTION WHEN USING TECHSTREAM CAUTION:
Observe the following items for safety reasons:
- Before using the Techstream, read the instruction manual.
- Prevent the Techstream cable from being caught on the pedals, shift
lever or steering wheel when driving with the Techstream connected to
the vehicle.
- When driving the vehicle for testing purposes using the Techstream, 2
persons are required. One to drive the vehicle, and another to operate
the Techstream.
INITIALIZATION
NOTICE:
- Perform Registration (VIN registration) after replacing the ECM.
Click here 
- Perform Learning Value Reset and Idle Learning after replacing or servicing parts related to engine operation.
Click here
- Perform "Grill Shutter Control Mode Switching and Grill Shutter
Initialization" after replacing the swing grille actuator assembly or
radiator shutter sub-assembly.
Click here
- When the cable is disconnected from the negative (-) auxiliary battery
terminal, initialize the following system(s) after the cable is
reconnected.
|
System Name |
See Procedure |
|
Lane Departure Alert System (w/ Steering Control) |
|
|
Intelligent Clearance Sonar System |
|
Parking Assist Monitor System |
|
Panoramic View Monitor System |
|
Pre-collision System |
|
Lighting System (for HV Model with Cornering Light) |
PRECAUTIONS FOR INSPECTING HYBRID CONTROL SYSTEM (a) Refer to Hybrid Control System.
Click here NOTICE FOR HYBRID CONTROL SYSTEM ACTIVATION
(a) Refer to Hybrid Control System. Click here
|
