Toyota Avalon Service & Repair Manual: Freeze Frame Data

FREEZE FRAME DATA

FREEZE FRAME DATA

NOTICE:

  • It is difficult to show the specified values (judgment values) clearly because freeze frame data values change significantly due to differences in measurement conditions, surroundings, or vehicle conditions. For this reason, there may be a problem even when the values are within specification.
  • Turn the engine switch on (IG) and park the vehicle on level ground. Check the freeze frame data by using the Techstream.

(a) Turn the engine switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the engine switch on (IG).

(d) Turn the Techstream on.

(e) Check the freeze frame data on the Techstream.

Chassis > EMPS

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Meter Vehicle Velocity

Vehicle speed from speedometer

Min.: 0.0 km/h (0.0 MPH)

Max.: 300.0 km/h (186.4 MPH)

  • 0 km/h (0 MPH): Engine running and vehicle stopped
  • No significant fluctuation: Engine running and vehicle driven at a constant speed

-

Wheel Speed Right

Rear right wheel speed

Min.: 0 km/h (0 MPH)

Max.: 255 km/h (158 MPH)

  • 0 km/h (0 MPH): Engine running and vehicle stopped
  • No significant fluctuation: Engine running and vehicle driven at a constant speed

-

Wheel Speed Left

Rear left wheel speed

Min.: 0 km/h (0 MPH)

Max.: 255 km/h (158 MPH)

  • 0 km/h (0 MPH): Engine running and vehicle stopped
  • No significant fluctuation: Engine running and vehicle driven at a constant speed

-

Engine Revolution

Engine speed

Min.: 0 rpm

Max.: 12800 rpm

No significant fluctuation

Engine running at a constant speed

Motor Actual Current

Amount of current to motor

Min.: -327.68 A

Max.: 327.67 A

Value changes in proportion to steering effort

- The value increases when turning right and decreases when turning left

Engine running and steering wheel being turned

Command Value Current

Requested current to motor

Min.: -327.68 A

Max.: 327.67 A

Value changes in proportion to steering effort

- The value increases when turning right and decreases when turning left

Engine running and steering wheel being turned

Steering Angle Velocity

Steering angle speed

Min.: -32768 deg/s

Max.: 32767 deg/s

Value changes in proportion to steering speed

- The value increases when turning left and decreases when turning right

Engine running and steering wheel being turned

Thermistor Temperature

ECU substrate temperature

Min.: -50.0°C (-58.0°F)

Max.: 150.0°C (302.0°F)

-50°C to 150°C (-58°F to 302°F)

-

IG Power Supply

IG power source voltage

Min.: 0.0000 V

Max.: 20.1531 V

8 to 16 V

Engine switch on (IG)

Steering Wheel Torque

Steering wheel torque

Min.: -327.68 Nm

Max.: 7.00 Nm

Value changes in proportion to steering effort

- The value increases when turning left and decreases when turning right

Engine running and steering wheel being turned

Motor Rotation Angle

Motor rotation angle

Min.: 0.000 deg

Max.: 1441.770 deg

During steering operation, motor rotation angle value changes from 0 to 360°

Engine running and steering wheel being turned

Command Val Current 2

Requested current to motor

Min.: -327.68 A

Max.: 327.67 A

Value changes in proportion to steering effort

Engine running and steering wheel being turned

Motor Voltage

Motor power supply voltage

Min.: 0.000 V

Max.: 98.000 V

  • Approximately 27 V: Engine running and steering wheel being turned
  • Approximately 27 to 34 V: Engine running and steering wheel not being turned

-

TRQ1 Zero Point Value

Zero point value of torque sensor 1

Min.: 0.0000 V

Max.: 4.9725 V

2.3 to 2.7 V

Engine running and steering wheel not being turned (without load)

TRQ2 Zero Point Value

Zero point value of torque sensor 2

Min.: 0.0000 V

Max.: 4.9725 V

2.3 to 2.7 V

Engine running and steering wheel not being turned (without load)

PS Assist Signal

Status of the record of power steering assist signal

OFF or ON

OFF: Engine switch on (IG)

ON: Engine running

-

Motor Actual Current 2

Amount of current to motor

Min.: -327.68 A

Max.: 327.67 A

Value changes in proportion to steering effort

Engine running and steering wheel being turned

Rotation Angle Sens Avg(SIN)

Rotation angle sensor average (SIN)

Min.: 0.0000 V

Max.: 4.9725 V

-

-

Rotation Angle Sens Avg(COS)

Rotation angle sensor average (COS)

Min.: 0.0000 V

Max.: 4.9725 V

-

-

Steering Angle

Steering angle

Min.: -3072.0 deg

Max.: 3070.5 deg

-

-

Torque Sensor 1 Output

Torque sensor 1 output value

Min.: 0.0000 V

Max.: 4.9725 V

-

-

Torque Sensor 2 Output

Torque sensor 2 output value

Min.: 0.0000 V

Max.: 4.9725 V

-

-

Torque Sensor 1 Power Supply

Torque sensor 1 power supply voltage

Min.: 0.0000 V

Max.: 4.9725 V

-

-

Torque Sensor 2 Power Supply

Torque sensor 2 power supply voltage

Min.: 0.0000 V

Max.: 4.9725 V

-

-

Rotation Angle Sensor Output 1

Rotation angle sensor Vx1 output voltage

Min.: 0.0000 V

Max.: 4.9725 V

-

-

Rotation Angle Sensor Output 2

Rotation angle sensor Vx2 output voltage

Min.: 0.0000 V

Max.: 4.9725 V

-

-

Rotation Angle Sensor Output 3

Rotation angle sensor Vy1 output voltage

Min.: 0.0000 V

Max.: 4.9725 V

-

-

Rotation Angle Sensor Output 4

Rotation angle sensor Vy2 output voltage

Min.: 0.0000 V

Max.: 4.9725 V

-

-

Motor 1 Terminal Current (U)

Motor 1 terminal current (U phase)

Min.: -327.68 A

Max.: 327.67 A

Value changes in proportion to steering effort

Engine running and steering wheel being turned

Motor 1 Terminal Current (V)

Motor 1 terminal current (V phase)

Min.: -327.68 A

Max.: 327.67 A

Value changes in proportion to steering effort

Engine running and steering wheel being turned

Motor 1 Terminal Current (W)

Motor 1 terminal current (W phase)

Min.: -327.68 A

Max.: 327.67 A

Value changes in proportion to steering effort

Engine running and steering wheel being turned

Motor 2 Terminal Current (U)

Motor 2 terminal current (U phase)

Min.: -327.68 A

Max.: 327.67 A

Value changes in proportion to steering effort

Engine running and steering wheel being turned

Motor 2 Terminal Current (V)

Motor 2 terminal current (V phase)

Min.: -327.68 A

Max.: 327.67 A

Value changes in proportion to steering effort

Engine running and steering wheel being turned

Motor 2 Terminal Current (W)

Motor 2 terminal current (W phase)

Min.: -327.68 A

Max.: 327.67 A

Value changes in proportion to steering effort

Engine running and steering wheel being turned

Motor 1 U Phase Duty

Motor 1 U phase duty

Min.: 0.00%

Max.: 100.00%

-

-

Motor 1 V Phase Duty

Motor 1 V phase duty

Min.: 0.00%

Max.: 100.00%

-

-

Motor 1 W Phase Duty

Motor 1 W phase duty

Min.: 0.00%

Max.: 100.00%

-

-

Motor 2 U Phase Duty

Motor 2 U phase duty

Min.: 0.00%

Max.: 100.00%

-

-

Motor 2 V Phase Duty

Motor 2 V phase duty

Min.: 0.00%

Max.: 100.00%

-

-

Motor 2 W Phase Duty

Motor 2 W phase duty

Min.: 0.00%

Max.: 100.00%

-

-

Motor 1 Terminal Volt (U)

Motor 1 terminal voltage (U phase)

Min.: 0.000 V

Max.: 98.000 V

Value changes within 4 to 35 V range

Engine running and steering wheel being turned

Motor 1 Terminal Volt (V)

Motor 1 terminal voltage (V phase)

Min.: 0.000 V

Max.: 98.000 V

Value changes within 4 to 35 V range

Engine running and steering wheel being turned

Motor 1 Terminal Volt (W)

Motor 1 terminal voltage (W phase)

Min.: 0.000 V

Max.: 98.000 V

Value changes within 4 to 35 V range

Engine running and steering wheel being turned

Motor 2 Terminal Volt (U)

Motor 2 terminal voltage (U phase)

Min.: 0.000 V

Max.: 98.000 V

Value changes within 4 to 35 V range

Engine running and steering wheel being turned

Motor 2 Terminal Volt (V)

Motor 2 terminal voltage (V phase)

Min.: 0.000 V

Max.: 98.000 V

Value changes within 4 to 35 V range

Engine running and steering wheel being turned

Motor 2 Terminal Volt (W)

Motor 2 terminal voltage (W phase)

Min.: 0.000 V

Max.: 98.000 V

Value changes within 4 to 35 V range

Engine running and steering wheel being turned

Motor 1 PIG Power Supply

Power supply voltage to active motor 1

Min.: 0.0000 V

Max.: 20.1531 V

9 to 16 V

Engine running and steering wheel being turned

Motor 2 PIG Power Supply

Power supply voltage to active motor 2

Min.: 0.0000 V

Max.: 20.1531 V

9 to 16 V

Engine running and steering wheel being turned

    Fail-safe Chart

    How To Proceed With Troubleshooting

    See More:

    Toyota Avalon Service & Repair Manual > Rear Seat Inner Belt Assembly(for Rh Side): Components
    COMPONENTS ILLUSTRATION *1 SPARE WHEEL COVER ASSEMBLY - - ILLUSTRATION *A for Gasoline Model *B for HV Model *1 LUGGAGE COMPARTMENT INNER TRIM PAD *2 REAR CENTER SEAT OUTER BELT ASSEMBLY *3 REAR SEAT CUSHION ASSEMBLY *4 REAR SEAT CUSHION LOCK HOOK *5 REAR SEAT HEADREST ASSEMBLY *6 REAR SEAT INNER WI ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0139