Toyota Avalon Service & Repair Manual: Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL STEERING LOCK ACTUATOR ASSEMBLY

NOTICE:

When replacing the steering lock actuator assembly, perform registration.

(a) Secure the steering column assembly in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.

(b) Temporarily install the steering lock actuator assembly with 2 new steering lock set bolts.

(c) Tighten the 2 steering lock set bolts until the bolt head breaks off.

    Installation

    Removal

    See More:

    Toyota Avalon Service & Repair Manual > Washer Level Warning Switch: Installation
    INSTALLATION PROCEDURE 1. INSTALL LEVEL WARNING SWITCH ASSEMBLY (a) Install the level warning switch assembly as shown in the illustration. *a Protrusion *b Marking Install in this Direction NOTICE: Make sure that the protrusion of the level warning switch assembly is between the 2 markings. (b) Con ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0146