DESCRIPTION The absorber control ECU stores this DTC when a malfunction signal from the master cylinder pressure sensor built into the brake actuator assembly is received via CAN communication.
PROCEDURE
(a) Go to electronically controlled brake system. Click here
|
Toyota Avalon Service & Repair Manual > Shift Lever: Inspection
INSPECTION PROCEDURE 1. INSPECT SHIFT LOCK CONTROL ECU HINT: If the results of the following inspections are as specified but a malfunction has occurred, replace the shift lock control unit assembly. (a) Inspect wire harness: (1) Disconnect the shift lock control ECU connector. (2) Measure the volta ...