DESCRIPTION When "Change Wheel" is selected on the multi-information display and the "OK" switch (steering pad switch assembly) is pushed and held, the system enters ID registration mode and the tire pressure warning light blinks 3 times. The main body ECU (multiplex network body ECU) receives signals from the combination meter assembly via the CAN communication line. WIRING DIAGRAM PROCEDURE
(a) Perform Test Mode Procedure (Tire Pressure Warning Reset Switch Check (DTC C2198)). Click here
|
Toyota Avalon Service & Repair Manual > Combination Meter: Installation
INSTALLATION PROCEDURE 1. INSTALL COMBINATION METER ASSEMBLY (a) Connect the 2 connectors. (b) Engage the clamp. (c) Engage the 2 clips as shown in the illustration. Install in this Direction (d) Install the combination meter assembly with the 3 screws. 2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB ...