Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Customize Parameters

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Vehicle Exterior / Door / Hatch / Luggage Compartment Door Opener System(for Gasoline Model) / Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE LUGGAGE COMPARTMENT DOOR OPENER SYSTEM

HINT:

The following items can be customized.

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the engine switch on (IG).

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Door Lock.

(5) Select the setting by referring to the table below.

Door Lock

Tester Display

Description

Default

Setting

ECU

Trunk Link with Door Lock

Function that opens the luggage compartment door when the luggage electrical key switch is pressed and all doors are unlocked using the entry door lock function, wireless door lock function, mechanical key or door control switch.

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)
    Luggage Compartment Door Opener System(for Gasoline Model)

    Data List / Active Test

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Fail-safe Chart
    FAIL-SAFE CHART If any of the following DTCs are stored, the ECM enters fail-safe mode to allow the vehicle to be driven temporarily or stops fuel injection. DTC Code Component Fail-Safe Operation Fail-Safe Deactivation Condition P001001 P001600 P136001 P136201 P261401 Cam timing control motor with ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0169