CAUTION / NOTICE / HINT HINT:
PROCEDURE
HINT:
(a) Measure the auxiliary battery voltage with the power switch off. Standard Voltage: 11 to 14 V If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step. (b) Check the fuses and relays. (c) Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.
(a) Using the Techstream, check for CAN communication system DTCs. Click here
(a) Refer to Problem Symptoms Table. Click here
(a) Operation Check Click here (b) Terminals of ECU Click here (c) Data List / Active Test Click here (d) Inspection
|
Toyota Avalon Service & Repair Manual > Automatic Transaxle System: Monitor Drive Pattern
MONITOR DRIVE PATTERN MONITOR DRIVE PATTERN FOR ECT CAUTION: Perform the following procedure on a level surface while strictly observing all traffic laws and speed limits. HINT: Performing this drive pattern is one method to simulate ECM (ECT) malfunction detection conditions. Some DTCs may not be d ...