TERMINALS OF ECU CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (a) Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly. Click here (b) Measure the resistance according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the connectors disconnected.
(c) Reconnect the instrument panel junction block assembly connectors. (d) Measure the resistance and voltage according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the connectors disconnected.
(e) Install the main body ECU (multiplex network body ECU) to the instrument panel junction block assembly. Click here (f) Measure the voltage and check for pulses according to the value(s) in the table below.
CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Camshaft Oil Control Valve(for Intake Side Of Bank 2): Installation
INSTALLATION PROCEDURE 1. INSTALL CAMSHAFT TIMING GEAR BOLT (a) Make sure that the No. 1 cylinder is at TDC/compression. HINT: Check that the cutout of the camshaft timing gear assembly is at the top and align the timing mark (cutout) of the crankshaft pulley with the timing mark on the timing chain ...