Toyota Avalon Service & Repair Manual: Installation

INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

After installing the luggage compartment door support assembly, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly.

PROCEDURE

1. INSTALL LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY

NOTICE:

  • Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.
  • Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.
  • Do not apply any horizontal load to the luggage compartment door support assembly in order to prevent the piston rod from deforming.

(a) Engage the guide as shown in the illustration.

Install in this Direction (1)

Install in this Direction (2)

(b) Engage the ball joint to install the luggage compartment door support assembly.

NOTICE:

Install the luggage compartment door support assembly while supporting the luggage door by hand.

(c) Check that the ball joint is engaged securely and the luggage compartment door support assembly cannot be pulled off.

2. INSTALL LUGGAGE DOOR HINGE SUPPORT BUSH

(a) Engage the 2 claws to install the luggage door hinge support bush.

HINT:

Use the same procedure for the RH side and LH side.

3. INSTALL BACK DOOR STAY SPRING

(a) Engage the 2 guides to install the back door stay spring.

NOTICE:

Make sure that the paint mark is on the front inner side.

HINT:

Use the same procedure for the RH side and LH side.

*a

w/o Rear Spoiler:

Paint Mark (White)

w/ Rear Spoiler:

Paint Mark (Black)

4. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH

(a) Engage the 2 fasteners.

(b) Install the luggage compartment trim inner cover LH with the 2 clips.

5. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER RH

(a) Engage the 2 fasteners.

(b) Install the luggage compartment trim inner cover RH with the 2 clips.

6. INSTALL LUGGAGE TRIM SERVICE HOLE COVER (for HV Model)

Click here

7. INSTALL LUGGAGE COMPARTMENT INNER TRIM PAD

(a) Install the luggage compartment inner trim pad.

8. INSTALL REAR FLOOR FINISH PLATE

(a) Engage the 4 clips and 2 guides to install the rear floor finish plate as shown in the illustration.

Install in this Direction

(b) Install the 4 clips.

9. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

(a) Engage the guide and claw to install the No. 1 luggage compartment trim hook.

HINT:

Use the same procedure for the RH side and LH side.

10. INSTALL BAGGAGE HOLDER NET

(a) Engage the 4 guides to install the baggage holder net.

11. INSTALL SPARE WHEEL COVER ASSEMBLY

(a) Install the spare wheel cover assembly.

    Disposal

    Removal

    See More:

    Toyota Avalon Service & Repair Manual > Smart Key System(for Entry Function, Gasoline Model): Precaution
    PRECAUTION CAUTION REGARDING INTERFERENCE WITH ELECTRONIC DEVICES CAUTION: As weak radio waves are emitted from the electrical key transmitter sub-assembly, if a pacemaker is being used, be sure to read the pacemaker instruction manual and the following. People with implantable cardiac pacemakers, c ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0415