Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for the RH side and LH side.
• The following procedure is for the LH side.

PROCEDURE

1. PRECAUTION

NOTICE:

After turning the engine switch (for Gasoline Model) or power switch (for HV Model) off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

Click here

2. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY

Install in this Direction

(a) Engage the 7 claws to install a new front door belt moulding assembly as shown in the illustration.

3. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

Click here

4. INSTALL FRONT DOOR VENT SEAL

Click here

5. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP

Click here

6. INSTALL FRONT DOOR SERVICE HOLE COVER

Click here

7. INSTALL FRONT DOOR TRIM BRACKET

Click here

8. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

Click here

9. INSTALL COURTESY LIGHT ASSEMBLY

Click here

10. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Driver Side)

Click here

11. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Front Passenger Side)

Click here

12. INSTALL FRONT DOOR TRIM POCKET COVER

Click here

13. INSTALL FRONT DOOR ARMREST COVER SUB-ASSEMBLY

Click here

14. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

for A25A-FXS:

Click here

for 2GR-FKS:

Click here

15. INSTALL LUGGAGE TRIM SERVICE HOLE COVER (for HV Model)

Click here

16. INITIALIZE POWER WINDOW CONTROL SYSTEM

for Gasoline Model:

Click here

for HV Model:

Click here

17. INSPECT POWER WINDOW OPERATION

for Gasoline Model:

Click here

for HV Model:

Click here