DESCRIPTION The steering sensor receives the turn signal switch information and controls the turn signal lights. WIRING DIAGRAM PROCEDURE
(a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Chassis / Steering Angle Sensor / Data List. (e) Read the Data List according to the display on the Techstream. Chassis > Steering Angle Sensor > Data List
OK: Normal conditions listed above are displayed.
(a) Remove the turn signal switch. Click here (b) Inspect the turn signal switch. Click here
(a) Remove the steering wheel switch housing. Click here (b) Inspect the steering wheel switch housing. Click here
|
Toyota Avalon Service & Repair Manual > Engine Coolant Temperature Sensor: Inspection
INSPECTION PROCEDURE 1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR CAUTION: Do not put your hands into the water that has been heated for the inspection. Touching the heated water could result in burns. (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Test ...