Toyota Avalon Service & Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

*a

Component without harness connected

(Side Turn Signal Light Assembly LH)

(a) Apply auxiliary battery voltage to the side turn signal light assembly LH and check that the light illuminates.

OK:

Measurement Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 2 (B)

Auxiliary battery negative (-) → Terminal 1 (E)

Side turn signal light illuminates

If the result is not as specified, replace the side turn signal light assembly LH.

2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

*a

Component without harness connected

(Side Turn Signal Light Assembly RH)

(a) Apply auxiliary battery voltage to the side turn signal light assembly RH and check that the light illuminates.

OK:

Measurement Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 2 (B)

Auxiliary battery negative (-) → Terminal 1 (E)

Side turn signal light illuminates

If the result is not as specified, replace the side turn signal light assembly RH.

    Components

    Installation

    See More:

    Toyota Avalon Service & Repair Manual > Charging System: Dtc Check / Clear
    DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Powertrain / Engine / Trouble Codes. Powertrain > Engine > Trouble Codes (e) Check the details of the DTCs. Click here CLEAR DTC (a ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0114