CAUTION / NOTICE / HINT HINT:
PROCEDURE
HINT:
(a) Measure the battery voltage. Standard Voltage: 11 to 14 V If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step. (b) Check the fuses and relays. (c) Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.
(a) Using the Techstream, check for CAN communication system DTCs. Click here
(a) Refer to Problem Symptoms Table. Click here
(a) Operation Check Click here (b) Terminals of ECU Click here (c) Data List / Active Test Click here (d) Inspection
|
Toyota Avalon Service & Repair Manual > Power Mirror Control System(for Hv Model Without Memory): Parts Location
PARTS LOCATION ILLUSTRATION *1 OUTER MIRROR SWITCH ASSEMBLY *2 OUTER REAR VIEW MIRROR ASSEMBLY LH *3 OUTER REAR VIEW MIRROR ASSEMBLY RH *4 OUTER MIRROR LH *5 OUTER MIRROR RH *6 MIRROR SELECT AND SURFACE ADJUST SWITCH *7 NO. 1 ENGINE ROOM RELAY BLOCK AND NO. 1 JUNCTION BLOCK ASSEMBLY - DEF FUSE - DEF ...