Toyota Avalon Service & Repair Manual: Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE SLIDING ROOF SYSTEM

HINT:

The following items can be customized.

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the power switch on (IG).

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Power Window.

(5) Select the setting by referring to the table below.

Power Window

Tester Display

Description

Default

Setting

ECU

Door Key P/W Up

Function to close the power windows and sliding roof using the mechanical key

OFF

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

Door Key P/W Down

Function to open the power windows and sliding roof using the mechanical key

OFF

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

P/W Down W/ Transmit

Function to open the power windows and sliding roof using the electrical key transmitter sub-assembly

OFF

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

(6) Enter the following menus: Customize Setting / Slide Roof.

(7) Select the setting by referring to the table below.

Slide Roof

Tester Display

Description

Default

Setting

ECU

Door Key Related Operation

Function to select tilt up or slide open of sliding roof key-linked function

Slide

0:Slide,1:Tilt

Sliding roof ECU (Sliding roof drive gear assembly)

Wireless Key Related Operation

Function to select tilt up or slide open of sliding roof wireless transmitter-linked function

Slide

0:Slide,1:Tilt

Sliding roof ECU (Sliding roof drive gear assembly)

Front SW Auto Operation

Function to enable/disable auto operation

ON

0:OFF,1:ON

Sliding roof ECU (Sliding roof drive gear assembly)

(8) Enter the following menus: Customize Setting / Security.

(9) Select the setting by referring to the table below.

Security

Tester Display

Description

Default

Setting

ECU

Slide Roof Open Warning

Function to enable or disable the sliding roof open warning

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

    Position Initialization Incomplete (B2343)

    Data List / Active Test

    See More:

    Toyota Avalon Service & Repair Manual > Tire Pressure Warning System(for Hv Model): Initialization
    INITIALIZATION NOTICE: Initialization can be confirmed through the tire pressure warning light. If the power switch is turned off during initialization, the tire pressure warning ECU and receiver memorizes that initialization was being performed. Therefore, it is not necessary to perform the initial ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0174