Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

(a) Check the operation of the door lock motor.

(1) Move the door lock to the close (lock) position.

*a

Close (Lock)

*b

Open (Unlock)

*c

Component without harness connected

(Luggage Compartment Door Lock Assembly)

(2) Apply auxiliary battery voltage to the door lock motor and check the operation of the door lock motor.

OK:

Auxiliary Battery Connection

Result

Auxiliary battery positive (+) → Terminal 1

Auxiliary battery negative (-) → Terminal 2

Luggage compartment door lock motor open (unlock) operation

If the result is not as specified, replace the luggage compartment door lock assembly.

(b) Check the operation of the luggage compartment door courtesy switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

2 - 3

Closed (Locked)

10 kΩ or higher

2 - 3

Open (Unlocked)

Below 1 Ω

If the result is not as specified, replace the luggage compartment door lock assembly.

    Components

    Installation

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Rear Bumper: Installation
    INSTALLATION PROCEDURE 1. INSTALL REAR BUMPER ASSEMBLY (a) w/ Intuitive Parking Assist System: Install in this Direction (1) Connect the connector. (b) Engage the 6 claws as shown in the illustration. (c) Engage the 6 claws as shown in the illustration. Install in this Direction HINT: Use the same p ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0113