Toyota Avalon Service & Repair Manual: Initialization

INITIALIZATION

SERVO MOTOR INITIALIZATION

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Press the OFF switch.

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / Air Conditioner / Utility / Servomotor Initialization.

(f) According to the Techstream display, perform servo motor initialization.

Body Electrical > Air Conditioner > Utility

Tester Display

Servomotor Initialization

HINT:

When initialization is started, the AUTO switch indicator will illuminate and then will turn off when initialization has completed.

(g) Select Exit to complete initialization.

    How To Proceed With Troubleshooting

    No Cool Air Comes Out

    See More:

    Toyota Avalon Service & Repair Manual > Front Wheel Alignment: Adjustment
    ADJUSTMENT CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after completing the front wheel alignment procedure are shown below. Necessary Procedures After Procedure Performed Replaced Part or Performed Procedure Nece ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0203