DISASSEMBLY PROCEDURE 1. REMOVE NO. 2 ROOF SILENCER (for Normal Roof) (a) Remove the 2 No. 2 roof silencers.  2. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY Click here 3. REMOVE ACTIVE NOISE CONTROL MICROPHONE WITH COVER (w/ Active Noise Control System) Click here 4. REMOVE NO. 1 ROOF WIRE (a) Remove the adhesive tape from the roof headlining assembly. 
(b) Disengage the No. 1 roof wire from each notch. 
(c) Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Center Airbag Sensor Assembly: Installation
INSTALLATION PROCEDURE 1. INSTALL AIRBAG ECU ASSEMBLY (a) Check that the engine switch (for Gasoline Model) or power switch (for HV Model) is off. (b) Check that the cable is disconnected from the negative (-) auxiliary battery terminal. CAUTION: Wait at least 90 seconds after disconnecting the cabl ...
