INSTALLATION PROCEDURE 1. INSTALL REAR SEAT INNER BELT ASSEMBLY LH (a) Install the rear seat inner with center belt assembly LH with the bolt. Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Do not allow the anchor part of the rear seat inner with center belt assembly LH to overlap the protruding parts of the vehicle body. 
(b) Engage the clamp. (c) Connect the connector. 2. INSTALL REAR SEATBACK ASSEMBLY RH Click here 3. INSTALL REAR SEATBACK ASSEMBLY LH Click here 4. INSTALL REAR SEAT CUSHION LOCK HOOK Click here 5. INSTALL REAR SEAT CUSHION ASSEMBLY Click here 6. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY Click here 7. INSTALL REAR SEAT HEADREST ASSEMBLY Click here 8. INSTALL LUGGAGE COMPARTMENT INNER TRIM PAD Click here 9. INSTALL SPARE WHEEL COVER ASSEMBLY Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Precaution
PRECAUTION INITIALIZATION NOTICE: Before replacing the ECM, refer to Registration. Click here Perform Registration (VIN registration) after replacing the ECM. Click here Perform Learning Value Reset and Idle Learning after replacing or servicing parts related to engine operation. Click here Make sur ...
