Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE SEAT BELT WARNING SYSTEM

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.
  • These buzzers should be on for safe driving. Perform this procedure only if it is necessary to set the buzzer to off (disabled).

HINT:

The following items can be customized.

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the power switch on (IG).

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Warning.

(5) Select the setting by referring to the table below.

Warning

Tester Display

Description

Default

Setting

ECU

Driver Seatbelt Warning Buzzer Function

Enables sounding of the driver seat belt warning buzzer

ON

$00:OFF,$01:ON

Combination meter assembly

Passenger Seatbelt Warning Buzzer Function

Enables sounding of the front passenger seat belt warning buzzer

ON

$00:OFF,$01:ON

Combination meter assembly

Rear Right Seatbelt Warning Buzzer Function

Function to sound the rear RH seat belt warning buzzer

ON

$00:OFF,$01:ON

Combination meter assembly

Rear Left Seatbelt Warning Buzzer Function

Function to sound the rear LH seat belt warning buzzer

ON

$00:OFF,$01:ON

Combination meter assembly

Rear Center Seatbelt Warning Buzzer Function

Function to sound the rear center seat belt warning buzzer

ON

$00:OFF,$01:ON

Combination meter assembly

HINT:

These settings are only valid when the vehicle is driven at approximately 20 km/h (12 mph) or more.

    Seat Belt Warning System(for Hv Model)

    Data List / Active Test

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Pre-collision System(for Hv Model): Front Radar Sensor Region Code Mismatch (C1A0A)
    DESCRIPTION The driving support ECU assembly uses the millimeter wave radar sensor assembly to detect objects in front of the vehicle. Based on signals from the millimeter wave radar sensor assembly, the driving support ECU assembly calculates the possibility of a collision and operates the pre-coll ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2025 Copyright www.tavalon.net
    0.0235