Toyota Avalon Service & Repair Manual: Check Mode Procedure

CHECK MODE PROCEDURE

CHECK MODE (SIGNAL CHECK): DTC CHECK

(a) Turn the engine switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the engine switch on (IG).

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / SRS Airbag / Utility / Signal Check.

Body Electrical > SRS Airbag > Utility

Tester Display

Signal Check

NOTICE:

Select Signal Check on the Techstream to clear the DTCs (both current and history).

HINT:

  • DTCs can be detected more sensitively in check mode than in normal diagnosis mode.
  • Perform check mode inspection when a malfunction in a squib circuit is suspected even after the normal system code is output through normal diagnosis mode inspection.
    Short in Rear P/T Squib (LH) Circuit (B1925-B1928)

    Data List / Active Test

    See More:

    Toyota Avalon Service & Repair Manual > Theft Deterrent / Keyless Entry: Electrical Key Oscillator(for Outside Luggage Compartment)
    ComponentsCOMPONENTS ILLUSTRATION *1 ELECTRICAL KEY ANTENNA *2 REAR BUMPER ASSEMBLY InstallationINSTALLATION PROCEDURE 1. INSTALL ELECTRICAL KEY ANTENNA (a) Engage the guide and install the electrical key antenna with the nut. NOTICE: Be careful when installing the electrical key antenna. If the el ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0236