ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: Be sure to correctly follow the removal and installation procedures for the curtain shield airbag assemblies. PROCEDURE 1. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle not Involved in Collision) (a) Perform a diagnostic system check. for Gasoline Model: Click here for HV Model: Click here (b) Visually check for defects with the curtain shield airbag assemblies installed to the vehicle. HINT: The defects are as follows:
OK: No defects are found. If any defects are found, replace each pillar garnish or the roof headlining assembly with a new one. 2. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed) (a) Perform a diagnostic system check. for Gasoline Model: Click here for HV Model: Click here (b) Visually check for defects with the curtain shield airbag assemblies removed from the vehicle. HINT: The defects are as follows:
OK: No defects are found. If any defects are found, replace the curtain shield airbag assembly with a new one. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Automatic Transaxle System: Transmission Fluid Temperature Sensor "A" Circuit Range/Performance (P071000)
DESCRIPTION The ATF temperature sensor converts the automatic transaxle fluid (ATF) temperature into a resistance value for use by the ECM. The ECM applies a voltage to the temperature sensor through terminal THO1 of the ECM. The sensor resistance changes with the ATF temperature. As the temperature ...