Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Steering Angle Sensor Internal Circuit (C1433)

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Brake / Brake Control / Dynamic Control Systems / Electronically Controlled Brake System(for Hv Model) / Steering Angle Sensor Internal Circuit (C1433)

DESCRIPTION

The skid control ECU (brake booster with master cylinder assembly) outputs this DTC when it receives an internal malfunction signal from the steering angle sensor.

DTC No.

Detection Item

INF Code

DTC Detection Condition

Trouble Area

MIL

Note

C1433

Steering Angle Sensor Internal Circuit

702

When the lG1 terminal voltage is 9.5 V or more, a malfunction signal from the steering angle sensor is detected.

Steering angle sensor

Does not come on

VSC DTC

PROCEDURE

1.

REPLACE STEERING ANGLE SENSOR

(a) Replace the steering angle sensor.

Click here

NEXT

END
    Steering Angle Sensor Power Source Voltage (C1432)

    Steering Angle Sensor Output (C1434)

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Active Noise Control System: Freeze Frame Data
    FREEZE FRAME DATA CHECK FREEZE FRAME DATA HINT: Whenever an active noise control system DTC is stored, the stereo component equalizer assembly stores the current vehicle state as freeze frame data. (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0182