Toyota Avalon Service & Repair Manual: On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT BRAKE BOOSTER ASSEMBLY

(a) Airtightness check

(1) Start the engine and stop it after 1 or 2 minutes. Slowly depress the brake pedal several times.

HINT:

If the brake pedal can be depressed nearly to the floor the first time, but on the 2nd and 3rd time cannot be depressed as far, the brake booster assembly is airtight.

*a

Correct

*b

Incorrect

*c

1st

*d

2nd

*e

3rd

(2) Depress the brake pedal with the engine running, and stop the engine with the brake pedal depressed.

HINT:

If there is no change in the brake pedal reserve distance while holding the brake pedal depressed for 30 seconds, the brake booster assembly is airtight.

(b) Operation check

(1) Depress the brake pedal several times with the engine switch off and check that there is no change in the brake pedal reserve distance when the brake pedal is depressed.

(2) Depress and hold the brake pedal, then start the engine.

HINT:

If the brake pedal goes down slightly, operation is normal.

    Installation

    Reassembly

    See More:

    Toyota Avalon Service & Repair Manual > Tire Pressure Warning System(for Gasoline Model): Diagnostic Trouble Code Chart
    DIAGNOSTIC TROUBLE CODE CHART Tire Pressure Warning ECU and Receiver DTC No. Detection Item Note Link B1247 Tire Pressure Monitor Receiver Communication Stop This DTC is for main body ECU (multiplex network body ECU) C2111 Transmitter ID1 Operation Stop - C2112 Transmitter ID2 Operation Stop - C2113 ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2022 Copyright www.tavalon.net
    0.0149